How The Alco-Tube Plus Works

Below is information on how the Alco-Tube Plus works. If you have any questions, please contact us.

Before Using

Wait 20 minutes after your last alcoholic drink or 5 minutes after smoking.

Using

1. Press firmly on both plastic part (nozzle) located at each end of the tube.
2. Inhale deeply.
3. Exhale slowly and continuously as indicated on the tube.
4. Stop blowing as soon as the red dot located at the end of the tube becomes white.

Interpretation

1. Wait until the white dot comes back to red.
2. In contact with alcohol, the yellow crystals will change to green. If the green color reaches or exceeds the black line, you are over the legal limit of .08 gr per liter of blood.

The results of this test cannot in any case be opposable to the results of a test obtained by an official. The decisions taken by the user based on the result of this test are the user's total responsibility and they cannot engage the responsibility of the manufacturer, the distributors or the retailers.

This device is designed to provide an indication of your blood alcohol concentration only at the time the test is taken. In some cases, it may require up to 60 minutes to reach the highest blood alcohol concentration after the last consumption of alcohol. Each individual body responds uniquely to the consumption of alcohol. A person's ability to drive may become legally impaired at a point below the legal BAC limit.

Precautions

This product is made with glass, it is fragile. Do not use the test if the aluminum parts (nozzles) are already perforated, if the glass is cracked or broken, or if the crystals are already green. Do not ingest. In case of contacts with eyes or skin, rinse under water. Please dispose properly after usage. The manufacturer, distributors and retailers take no responsibility whatsoever for use or misuse of this product for any reason.

The reagent is maintained firmly between two stainless steel gates.
The tube of glass is sealed at each extremity by an aluminum core.

Striker tips are placed at each end of the tube to prevent damage due to shock.

An adhesive label is surrounding the glass tube for an increased resistance to shock.

Composition of Product

1. Special glass tube.
2. Adhesive label.
3. Stainless steel treated inside gridle.
4. Striker tips at each end of the tube.
5. Reactive solution.

The solution is safe due to the minimal composition of active chemical ingredients.
Rinse with clear water in the event of accidental contact with skin.

Please note that the Alco-Tube Plus is a preventative device. It is not a license for you to drive after passing the Dr. TUBE Challenge. Legal Disclaimer.